Interface Module for Telex RTS wired intercom

Product Features

MPN: EVXINRTS

The interface Module plugs into the Pro 16 CMod to establish a seamless audio link between wired and wireless comms.

The interface module gets plugged into channel 1 of the RTS system. RTS channel 1 is where the interface module gets it's power and it's communications from.

Please note the interface is Comms system specific. 
Connection to incorrect wired Partyline comms may result in non warranty damage to Interface.

The interface does not have a memory and will lose it settings at intercom power down or upon disconnection to the wired intercom.
The interface MUST ALWAYS be disconnected from the Eartec Cmod before power up.

The interface takes it power from the wired intercom line and performs an initialisation of the line characteristics. If during this process the interface is connected to the Cdom the "balancing" of the two 2 wire partyline systems will be incorrect with levels all over the place and probably unusuable.

Share this page